Overview and Uses:

2CY series gear pumps | gear lubrication pump is mainly used for various mechanical equipment lubrication lubricant delivery system for conveying viscosity at 10 ° E (75C.ST) below, the temperature below 80 ℃ has lubricity oil, also applies to the transport of corrosive, non-lubricity, media containing solid particles. For high temperatures, contact with the unit can be equipped with high-temperature materials. No lubrication delivery of oil, beverages, low corrosive water, etc., please use the unit as a whole stainless steel gear pump has production. In addition to this series gear pump outside normal motor home, but also need to configure the same specifications of explosion-proof motor according to the user.

Features:

2CY series gear pump is mainly composed of gears, shafts, pump, pump cover, bearing housing, shaft seals and other components. Gears and shafts are strictly heat treatment, with high hardness and wear resistance, together with the shaft mounted in the sleeve. All moving parts inside the pump are lubricated use its delivery.

The four sets of floating pump bearing is installed in the pump body, automatically adjusts the size of the end spacer with work pressure, so the pump pressure stability, low output flow pulsation and high volumetric efficiency.

Technical parameters:

Performance:

Flow range: 18.3L / min ~ 960L / min

Head Range: 36m ~ 250m

Motor power: 1.5kw ~ 30kw

NOTE: If you have special requirements, please contact our technical staff! (0577-67981666)

Model significance:

Examples: 2CY1.1 / 14.5

2CY ------- ----------- 1.1 gear pump type flow (m³ / h)

14.5 ---------- pressure × 0.1MPa220