Product Specification
Brand | B2B Networking Solutions LLC |
Condition | New |
Product Descriptions
It is non-toxic, non-hazardous, non-corrosive and non-caustic. When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place. FleetKleen is available in a wide array of packaging and size options.
PRODUCT OVERVIEW
FleetKleenâ„¢ is a new concept in the cleaning and degreasing of driveways, concrete floors, metal grating, cement and most solid surfaces. This product utilizes Bio-Remedial technology to literally “eat” grease, oil, and hydrocarbons off any hard surface. This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons. FleetKleenâ„¢ contains no solvents and is non-flammable. It is non-toxic, non-hazardous, non-corrosive and non-caustic. When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place.
HOW TO USE THIS PRODUCT
FleetKleenâ„¢ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15 parts water to 1 part FleetKleenâ„¢ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.
PRESSURE WASHER PROCEDURE:
Insert the mixing tube of the pressure washer directly into the spout of the container.
This product must be mixed at a minimum of 15 parts water to 1 part FleetKleenâ„¢.
Adjust concentration levels as appropriate.
Apply the mixture directly on the area you wish to clean and degrease.
Use the “pressure” to aerate and agitate the “stubborn” areas.
Allow the area to remain wet for as long as possible.
Very old stains may need several applications.
MANUAL SPRAYER & BRUSH PROCEDURE:
Pre-mix FleetKleen(tm) in an industrial sprayer at an appropriate concentration level.
This product must be mixed at a minimum of 15 parts water to 1 part FleetKleenâ„¢.
Spray the stained area with the mixture, being sure to cover the area to be cleaned.
Wait a few minutes before going to next step.
Agitate and aerate the area with a stiff brush or broom.
Allow the area to remain wet for as long as possible.
Very old stains may need several applications.
FOR OPTIMUM EFFECTIVENESS, A WATER TEMPERATURE BETWEEN 80° F. AND 90° F. SHOULD BE MAINTAINED. DO NOT EXCEED A WATER TEMPERTATURE OF 120° F
APPLICATIONS
While FleetKleenâ„¢ can be used in all phases of manufacturing, commercial and industrial operations, the following is a partial list of the many uses of this product. Please contact EnviroLogicâ„¢, if you have any questions about its usage:
Driveways
Loading Docks
Manufacturing Floors
Fueling areas
Lubrication Areas
Machine Shops
Garages
Warehouses
Hydraulic Line Breaks
Lubricant Pipeline Breaks
Equipment Failures
Tool Shops
Elevator Pits
Oil Storage Areas
Chemical Storage Area
Auto & Truck Wash Areas
Blow Pits
Maintenance Areas
General House-Keeping
Vehicle Parking Area
Pumping Stations
Concrete Walls
Brick & Gravel Areas
Vehicle Maintenance Areas
FleetKleen is an highly effective bioremedial cleaning product that can be used in all phases
of manufacturing as well as commercial and industrial operations. Some of its beneficial uses and
applications are:
- Driveways/Parking Lots
- Loading Docks
- Manufacturing Floors
- Fueling areas/stations
- Lubrication Areas
- Machine Shops
- Garages
- Hydraulic Line Breaks
- Oil Storage Areas
- Chemical Storage Area
- Auto & Truck Wash Areas
- General House Cleaning
- Vehicle Maintenance Areas
PACKAGING INFORMATION
1 GALLON “CUBITAINERS” (4 per case) – 5 GALLON “CUBITAINERS”
SHIPPING: 36 UNITS PER SKID – BULK PACKAGING AVAILABLE