The Gas Point is an economical, microprocessor-based gas detector for continuous monitoring of toxic gases, oxygen or inflammable gases.

Non intrusive calibration and maintenance is performed using a
magnetic wand to access the software through the enclosure
window – no need to open the enclosure (and obtain special area
permits) to perform routine calibrations.

Easy to install - The enclosure provides two mounting holes.
The instrument only need to be connected to the power supply (24 Vdc).

LCD graphic display - The backlight LCD graphic display shows the gas reading, with wide and visible numbers, together with the meausre unit and the gas name. Tapping a magnetic wand at the three buttons through the window gives full access to the menu and the calibration procedure. No need for an additional handheld terminal. The display can show also a bar graph of the concentration. The alarm and the fault signal are indicated by three flashing bright red leds.

Calibration and maintenance - Calibration procedure is fully automatically, and it is non-intrusive by the magnetic wand. New spare sensor can be easily put into the Gas Point by the factory precalibrated interface.
For more information please visit :
http://www.magusintl.com/ppe/ViewProductDetails.asp?ProductID=700&aID=Fixed%20Gas%20Monitors&L=4&CategoryID=16&CN=Fixed%20Gas%20Monitors