HCG Pregnancy Test is a self-testing immunoassay made for the rapid, visual and qualitative determination of human chorionic gonadotropin (HCG) in urine specimen to aid in the early detection of pregnancy.

TEST PROCEDURE
1. Bring the pouched test midstream to room temperature(15-30℃) prior to testing. Do not open the pouch until ready to perform the assay.
2. Remove the test midstream from the sealed pouch.
3. Remove the Cap and turn around the midstream to show the Absorbent Tip.
4. Hold the midstream by the Thumb Grip with the exposed absorbent tip pointing downward. Urinate on the absorbent tip directly till it is thoroughly wet (at least 5 seconds).
NOTE: Be careful and do not urinate in the Show Window.
5. Re-cap the test midstream and lay it on a flat surface with window side up .
6. Wait for pink-colored lines to appear. Read results within 5 minutes. Do not read results after 5 minutes.

INTERPRETATION OF RESULTS       

PREGNANT: Two distinct pink-colored lines appear, one in the test region (T) and one in the control region(C).

NOTE: The intensity of the pink color in the test region (T) may vary depending on the concentration of HCG 

present in the specimen. Therefore, any shade of pink color in the test region (T) should be considered positive.

NOT PREGNANT: Only one pink-colored line appears in the control region(C). No apparent pink line appears in 

the test region (T).

INVALID: Control Line fails to appear.

NOTE: Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control 

line failure. Review the procedure and repeat the test with a new test midstream. If the problem persists, please 

contact your local distributor.