Carpet tack strip Definition: Carpet Tack Strip be made of high quality poplar plywood,suitable for tensing the carpet to make sure carpet good performance.

Carpet tack strip Feature: one strip include 52 small nail and 9 manganese steel nails and 2 rows nails ; or one strip include 86 small nails and 9 manganese steel nails and 3 rows nails.

Carpet tack strip Description:
1.Length :1220MM(4 feet),1250MM(5 feet)
2.Width:20MM,22MM,25.4mm(1"),31MM
3.Thickness:5.5MM--7.0MM
4.Plywood:high quality 5-ply full Poplar plywood
5.Glue of plywood:E0
6.52pins and 9 nails in one strip
7.anti-rust nails:nails for wood/concrete floor
8. Packing: standard export packing 100PCS /carton; other will have 90pcs/ctn, 75pcs/ctn and 50pcs/ctn

9. Printing: we can print the strips and the carton as your requirements.

Carpet Tack strip (US) (also known as gripper rod (UK), carpet gripper, Smoothedge (Can), tackless strip, and gripper edge) is a thin piece of wood, studded with numbers of sharp nails or tacks used in the installation of carpet. They are nailed, tack side up, to the perimeter of the area being carpeted. After the underlay is installed , the carpet is cut to fit, stretched over the area and firmly anchored to the edges of floor via the tack strips. The Consmos carpet tack strip has two functions: first, the tacks grip the carpet and permanently hold it in place and second, the carpet edge is jammed into the gap between the tack strip and the wall which gives it a finished look with little effort. This method allows a high quality, long lasting installation to be completed quickly and easily.

Regular
The most economical type of carpet tack strips available. Plywood is approximately 7/8 inch wide. Use during routine residential and commercial installations.

Extra Wide
The most widely used type of carpet tack strips. Plywood is one full inch wide. Use during residential and commercial installation when extra holding power is required.