HIGH ROTATION FORZA CERAMICS MRS 400
__________________________________________________________________________________

High-speed pen with Borden connection, two holes according to ISO 9168; Brass body with rounded handle channels.

Balanced turbine with a rotation of 400,000 rpm ± 15% with high axial and radial torque and efficient concentricity of the drill bit; Mounted on synthetic rubber rings; It becomes silent by the absence of vibration of the turbine with the body; Rotation control via the foot control.

Ceramic ball bearings, the newest technology in high performance bearings, with high durability and greater lubrication efficiency.

Smaller head than conventional systems facilitates access to the most difficult faces of the teeth.

38g weight, reduces operator effort; Triple spray facilitates directing the liquid to the drill cooling.

Push-button system (PB) with simple pressure of the thumb tip on the cap of the head, opens the clamp that is actuated by spring for the operation of withdrawal or placement of drills, with mechanical pressure on the internal assembly of the head, the Which eliminates the inconveniences of the drill bit and the possibility of cross-contamination.

Adjusting the length of the drill bit defined by the CD; By fitting it with the fingers in the forceps, prevents the breaking and damaging of the tips, especially the diamonds, long and thin.

The non-use of drill bit, which is difficult to disinfect, provides a longer service life to the turbine / bearing assembly, due to the less effort applied.

Air consumption of 42.0 l / min ± 2 and working pressure of 30 psi ± 2.

Comes with rubber sealing connection, needle for clearing the spray, lubricating oil.

Sterilization through an autoclave up to 135 ° C and 2.2 bar does not damage the part due to the quality of the materials used in the manufacture.