Product Specification
Condition | New |
Warranty | YES |
Product Descriptions
Luxury sliding gates is a high-tech product which mainly provides intelligent management to passageway.This product is finely processed with complete functions and high level, suitable for high-level neighborhoods, intelligent buildings, hotel, subway, port and club,etc.
Flap Barrier is generally used to in access control of public passages. The mechanical part of the flap barrier contains an emergency control device, which allows automatic opening of the two wings in case of power failure; when power supply is resumed, the two wings will be reset automatically.
Functions:
■ Fault detection and alarm functions, easy to use and maintenance
■The running status can be programmed and controlled with the built-in keyboard on the main board
■Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
■Anti-breakthrough function. The gate is locked automatically until opening signal received
■Synchronization functions (for dual gate equipments)
■Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically
■Gate can be set as normally open or normally closed
■Can be used with variety of card readers: IC / ID card readers
■Direction can be set as single-direction or bi-direction
■LED direction indicator
■Gate auto opens when power off and auto close when power on, complying with fire safety requirements
■Alarm function, in case of illegal intrusion and reverse intrusion, etc.
■Counter function (optional)
■Support infrared photocell for anti-pinch and reset function
Specifications:
Framework: | SUS304 / Acrylic swing Arm/Carbon Steel Powder Coating |
Size; | L1400*W280*H980 mm |
Powersupply: | AC220V ±10% / 50 Hz ±10% |
Arm Length: | 260mm |
Pass width: | <600mm |
Motor: | DC Brushed 30W 24V |
Input Interface: | COM / 12V Dry contact |
Communication interface: | TCP/IPTCP/IP or RS485 ( optional) |
Passing Speed: | 25 person/min |
Direction: | One/Two Way |
Turn on-off time: | 0.6 second |
Unlock time: | 3 seconds |
Self-Resetting time: | 10 seconds |
Working Temperature: | -15°C-60°C , Relative Humidity ≤95%, No Densation |
The flap barrier has different optional configurations, applicable to all building conditions and capable of providing a solution for the control of all kinds of passage entrances and exits.