DESCRIPTION

With our sleeve cutters you always make a good cut - and with very little wear! The following trim levels are available:

HS
with manual operation, the pushing, adjusting the sleeve length and the cutting of the finished sleeve is done manually. The machine is designed for small quantities of prefabricated sleeves.

HSA
with semi-automatic function, the sleeves are pushed manually, automatically tensioned retracted thereby be measured and cut. Up to three different sleeve lengths and three different piece numbers can be entered.
The HSA is particularly suitable for small and medium quantities of pods - in all desired sleeve length. The HSA is with PLC equipped and display.

HSA-V
with fully automatic function: The sleeves are automatically de-accepted, pushed out of the magazine, tense, fed and cut. Up to three different sleeve lengths and three different numbers can be entered.
The HSA-V is particularly suitable for large quantities of sleeves - with all desired sleeve lengths. The HSA-V is equipped with PLC control and display.