ELECTRIC HEIGHT ADJUSTABLE MINIMUM HEIGHT
Height adjustable system by
articulated trapezes electrically
operated by 2 linear motors Linak
brand.
Lifting stroke of 380 mm and a
maximum patient load of 250kg.
A very advanced mechanical and
geometric design allows a minimum
height of just 380mm,from mattress
platform until the ground. This
f e a t u re h a s a g re a t d e a l o f
importance in the patient's bed
accessibility and on bedridden
patient’s acidental falls risks
prevention.
RADIO-TRANSLUCENT PLATFORM
4 plans HPL mattress platform,
extractable for cleaning and highly
resistant to some acid liquids such as
urine.
Suitable to incorporate x-ray cassette
holder.
06 ENDOTRACHEAL INTUBATION FIXED TO BASE HEADBOARD
Head and foot boards are vertically
removable.
However, headboard frame is fixed to
the base and platform articulations
independent, facilitating endotracheal
intubation maneuver by
moving the bed to it highest position,
without headboard removal need.
EXTENSION FEATURE
The footend board i s lenght
adjustable by fixation knobs to allow
the mattress platform extension over
220 mm.
Is equipped with a telescopic
mattress rack to keep extension
feature with the foot section raised.
BED LINEN HOLDER
PLATFORM HDPEmedical®
Modular set composed by 7
elements made in HDPEmedical®,
double-walled,resistant to some acid
liquids such as urine, schockproof
featured.
Extractable for cleaning by an
innovative clipping system.
05 MATTRESS PLATFORM
HEAD/FOOT BOARDS LOCKING
Head and foot boards are equipped
with locking buttons which prevent
the panels accidental removal while
bed’s transportation.
Optionally models can be supplied
without the lockers.
07 EXTENSIBLE FOOTEND
ERGONOMY
08 DOUBLE AUTO-REGRESSION ABDOMINAL COMPRESSION
Back-rest and leg-rest articulation
(Fowler position) causes a harmful
stress on the patient’s abdominal and
lumbar body areas.
Raising platform articulations
releases a simultaneous synchronized
sliding, very important to a
muscular relief especially on
abdominal surgery recovering.
PRESSURE ULCERS PREVENTION
Mattress platform auto-regression
also provides a pelvic and sacro-iliac
zone relief, a critical point on pressure
sores development.
The footend has retractable rack with
telescopic opening to support the
bed linen exchange service.
11 EMERGENCY CPR MANUAL CPR AUTO CPR
According controls option (embbed
on side-rails and/or supervisor
control), the bed has an electric auto
CPR/sleep feature to drop all
articulations and lead the bed until
minimum height.
This function is automatic by
pressing the corresponding control
key.
LOCKING BOX
The electrical functions can be
locked by service convenience purposes
or patient healthcare protection.
Locking box is placed in an area
inaccessible to the bedridden
patients.
12 FUNCTIONS LOCKING
Matrix T40 beds has bilateral buttons
to back-rest quick release dropping
w h i l e a c a r d i o p u l m o n a r y
reanimation procedure.
Buttons are red colored for an easy
identification.
09 INFECTIONS CONTROL HDPEmedical® ANTIMICROBIAL TREATMENT
Head/foot boards and side-rails are
made in HDPEmedical® a high
density polyethylene resin, with the
following features:
- Anti-shock,the plastic don’t brake in
result of light and accidental shocks.
- Fire retardant treatment within M2
class.
It contains an antimicrobial additive* which
is over 99% effective against the following
bacteria acquired at hospital environment:
- Staphylococcus aureus ATCC 6538
- Escherichia coli NCTC 8196
- Legionella pneumophila NCTC 11192
- Methicillin resistant Staphylococcus
aureus ATCC.
* Ask for techical data file to further
information.
SAFETY
10 RISK OF FALLS
The side-rails are allways included on
the bed set-up and meet the new
safety European Norm EN60601-2-
52.
Prevent and avoid the risk of injuries
on patient’s accidental falls, by a
lateral coverage high degree and
components has adequate gaps to
prevent body parts trapping.
STANDARD EN 60601-2-52
Side-rails are splitted and collapsible
individually. The locking on upper
position is made by a steel paw and
has a safety lever which impedes the
accidental triggering.
While folded retract over the
platform edge to enable the Zero Gap
on stretchers transference.
GAP ZERO
MOBILITY
16 BATTERY BACK-UP
15 FIFTH WHEEL
13 CENTRAL LOCKING SYSTEM
14 BRAKE ALARM
HIGH RANGE CASTERS CENTRAL LOCKING
MATRIX beds are equipped with high
quality casters made by german
brand Tente.
A Ø150mm diameter ensures
maximum smoothness crossing
ground rebounds such as elevators
entrance.
They have anti-static capacity to
discharge static electricity and are
ABS s h i e l d e d t o av o i d d u s t
accumulation.
Is provided by 2 brake pedals, one in
each bed’s corner, with central effect
and the following functions:
- Free course;
- Total locking;
- Steering lock.
BRAKE ALARM
The brake alarm is an extra option
and acts when bed is unlocked and
the power cord remains plugged.
This feature reduces considerably
the maintenance costs.
POWER CORD BRACKET
A very useful bracket to coil power
cord during bed’s transportation,
preserve cord integrity and save
some maintenance costs.
FIFTH WHEEL
The fifth wheel system significantly
improves the bed’s maneuverability
in narrow spaces.
The control unit is integrated in the
brake pedals at directional locking
position, making it unnecessary to
incorporate a dedicated pedal.
DIRECTIONAL LOCKING
Locking one caster swivel effect
allows to drive the bed over a straight
path throughout the hospital
corridors. The control is available in
the brake pedal at the green dot
position.
Bed has a 2 batteries pack to
maintain full operability off power
supply.
It has a range of about 100 cycles or
24 hours on standby.
When plugged to power supply, it
d o e s a n e l e c tr o n i c l o a d i n g
management, being unnecessary
unplugging the power cord once
loaded.