The PL-8900PLUS low air loss Multi-tubes Pressure Relieving System is a True Low Air Loss mattress that offers the ultimate in patient comfort and therapeutic pressure care. It is a partial alternating system that is designed for people that need to reduce excess moisture, increase capillary stimulation and achieve the highest levels of continuous comfort. It is therefore equally suitable for people at medium as well those at high and very high risk of pressure sores.
The main benefit of true low air loss is that you are literally sleeping on a blanket of air, which will continuously release itself through a series of laser cut holes.

At the same time – the torso cells will gently alternate their pressures causing a pleasant therapeutic sensation that stimulates the capillaries, to help ensure that tissue oxygenation and nutrition occur alongside the removal of toxins.
With such an array of features plus an incredible price point, the PL-8900PLUS low air loss Multi-tubes Pressure Relieving System is extremely popular amongst tissue viability and those involved in wound care and prevention of pressure ulcers.

SPECIFICATIONS

True Low Air Loss
True low air loss has been proven to significantly reduce excess moisture and to protect against skin maceration. The PL-8900PLUS low air loss Multi-tubes Pressure Relieving Systemincludes eight cells within the sacrum area, each of which is laser pierced in order to allow a continuous flow of air.

Alternating or Static Option
Care and washing procedures are difficult and sometimes dangerous on alternating surfaces. Therefore to enable a firm, safe and workable surface, the PL-8900PLUS low air loss Multi-tubes Pressure Relieving System includes an Alternating / Static button that can switch between alternating and static modes, static meaning, that all air cells are firm.

Full Replacement
Each of the durable Nylon/TPU or TPU cells within the mattress houses two separate air chambers. The top chamber may be set to alternating, static or low air loss, but the bottom chamber is kept inflated in case of short term power failure.

A/B Alternation
The popular A/B alternation system is proven to stimulate capillary action and to assist with the healing of pressure sores. A/B alternation means that when the pressure increases on the first, third and fifth cells (A cells) - it decreases on the second, fourth and sixth (B cells).

At the end of each cycle, which takes approximately ten minutes, the reverse occurs which means that the high and low pressures alternate throughout the mattress.

Medium, High & Very High Risk
All residents, irrespective of risk will find most basic air mattresses firm, and compared to a domestic bed - quite uncomfortable. Due to its micro low air loss and partial alternating features, the PL-8900PLUS low air loss Multi-tubes Pressure Relieving System is one of the most comfortable and protective systems available. Its pressure range is an impressive 30 – 60 mmHg which means that it can be used by most medium, high and very high risk persons.

Tough Digital Pump (30 stone)
The PL-8900PLUS low air loss Multi-tubes Pressure Relieving System comes complete with a tough digital pump that will cope with clients weighing up to 220kgs.
It is extremely easy to use and offers a visual mercurial display of its impressive pressure range of 30 – 60 mmHg. It offers a cycle time of 10 minutes and automatically compensates for a persons movement or repositioning.

Works with adjustable Beds
Most basic air mattresses will start to bottom out when the client has their back rest raised. The PL-8900PLUS low air loss Multi-tubes Pressure Relieving System however will continue to alternate and offer low air loss protection even in a chair or seating position.

Gore Tex Style Fabric
This true low air loss mattress helps to reduce perspiration due to a continuous flow of air through its central TPU cells. These in turn pass through a special water proof - breathable fabric which is similar to the ever popular Gore Tex. The outer part of the mattress also uses a heavy duty Gore Tex style fabric and is designed to last for many years.

CPR Valve
The PL-8900PLUS low air loss Multi-tubes Pressure Relieving System includes an easy to use CPR valve conveniently situated on the side panel. A simple lifting of the switch will deflate the mattress.

Transport Locking Device
The PL-8900PLUS low air loss Multi-tubes Pressure Relieving System comes with an easy to use transport locking device which is located at the end of the inflation tubes.
These tubes, each with a different function, are designed so that they can only fit the right way round.

Alternating Pressure Release Digital Control Pump

Specifications:
Power: 110V/ 60 or 50 Hz, 220v / 50 Hz
Pressure Range: 30-60mmHG
Air Output: 6~8 liters
Cycle Time: 10.15.20.25 Minutes
Noise: Less than 30db
Dimensions: 11 2/5” x 12 2/5” x 6 ”
Function: Comfort level adjustable, Alternating/Static option, Low pressure indication, Auto Firm inflation, Panel lock function Cycle time variable and Power failure alert/Low pressure alert.

Multi-tubes Pressure Release Mattress

Specifications:
Dimensions: 77” x 34” x 8”
Cells: 17 Nylon/TPU or TPU cells, each cell is replaceable and 8 cells are with micro low air loss.
Mattress Cover: Vinyl Water Repellent & Breathable Material.