Characteristics & Properties

▶ Removes of food, alkali, epoxy stains.
▶ Easy to use.
▶ Effectively removes deep set oil, dirt.
▶ Non-acidic formula.

 Storage

1. Apply poultice to the surface using a spatula. Uniformly
    apply a thick 5~10mm coating.
2. Using a light polyethylene film or other moisture
    resistant material, cover the area treated with poultice. 
    Tape or otherwise seal off the edges of the ply film.
3. Allow paste to remain on the surface for 12 to 48 hours.
    Remove protective film and dry the paste.
4. Scrape off poultice, Wash the surface thoroughly with
    fresh water using a sponge, soft cloth.
5. Repeat application where necessary.
6. Polish the clean surface with a soft dry cloth.

Field of Use

▶Storage temperature : between 5℃and 30℃

  Must be applied to material at temperature between

  5℃and 30℃

Packing

▶ 2kg, 5kg - bucket