Name: Talc Filler Masterbatch For Injection Molding And Extrusion Molding
Rating: 4 (32 reviews)

Request for quotation

Manufacturing customized talc filler masterbatch for injection molding and extrusion molding, we are well-known among those famous such suppliers in China, welcome to purchase talc filler masterbatch for injection molding and extrusion molding from us.
Product Description:
Talc filler masterbatch contains talcum, carrier resin and some additives. It&#8217;s suitable for film blowing, extrusion molding, injection molding, etc. This product has dispersion very fine, free of agglomeration and bring for the end product more improve printability, smoothness, hardness, stiffness, antiblock, etc. It is mainly used for PP, PE plastic sheet and plastic injection and EPE foaming. Product Data: 
<table>
<tr>
<td>Name</td>
<td>
Talc filler masterbatch for injection molding and EPE foaming
</td>
</tr>
<tr>
<td>
Filler
</td>
<td>
Talcum
</td>
</tr>
<tr>
<td>
Mesh
</td>
<td>
1250~1500
</td>
</tr>
<tr>
<td>
Filler content
</td>
<td>
≤75%
</td>
</tr>
<tr>
<td>
Carrier
</td>
<td>
PP/PE
</td>
</tr>
<tr>
<td>
MFI ( g/10min )
</td>
<td>
2~15
</td>
</tr>
<tr>
<td>
Density ( g/cm3)
</td>
<td>
1.6~1.7
</td>
</tr>
<tr>
<td>
Moisture
</td>
<td>
≤0.01%
</td>
</tr>
<tr>
<td>
Adding ration
</td>
<td>
5~50%
</td>
</tr>
<tr>
<td>
Application
</td>
<td>
Injection molding, EPE foaming, etc.
</td>
</tr>
<tr>
<td>
Payment terms
</td>
<td>
TT , LC etc.
</td>
</tr>
<tr>
<td>
Delivery time
</td>
<td>
Less than 7 days
</td>
</tr>
<tr>
<td>
Packing
</td>
<td>
25Kg per bag. compound woven bags with plastic inner bag, or customized
</td>
</tr>
<tr>
<td>
MOQ
</td>
<td>
1 ton
</td>
</tr>
<tr>
<td>
Storage
</td>
<td>
Keep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.
</td>
</tr>
</table>
Product Advantages: 1.The oil absorption of the powder is low, good fluidity and dispersion, good surface finishes of the products. 2.Light Specific gravity, high transparent and brightness, the refractive index close to the PP、PE 3.The high adding ratio is more than 50%. 4.Good dispersion, do not separate out. 5.Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property, improve the strength and toughness of the product. 6.Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding Application:
<table>
<tr>
<td>Model No.</td>
<td>
Application
</td>
</tr>
<tr>
<td>
H-1
</td>
<td>
Used for blow film/extrusion, such as shopping bags, hollow sheet.
</td>
</tr>
<tr>
<td>
H-8
</td>
<td>
Used for blow film/blow molding/extrusion, such as
</td>
</tr>
<tr>
<td>
H-10
</td>
<td>
EPE foaming and also customized
</td>
</tr>
</table>

Quantity

Ship to Country

China

Member since : 16-Jan-2017

ZIBO HOLY MASTERBATCH CO., LTD

Basic Member

GO TO STORE

Talc Filler Masterbatch For Injection Molding And Extrusion Molding_2

Request for quotation

Quantity

Ship to Country

Plastic Products

Talc Filler Masterbatch For Injection Molding And Extrusion Molding

Highlights :

Min Order : 10
Condition : New
Warranty: : YES
Country of shipping : China

Safe and secure payments using Abraa safe trade systems

Item Details

Product Specification

Brand	Zibo
Condition	New
Warranty	YES

Product Descriptions

Manufacturing customized talc filler masterbatch for injection molding and extrusion molding, we are well-known among those famous such suppliers in China, welcome to purchase talc filler masterbatch for injection molding and extrusion molding from us.

Product Description:

Talc filler masterbatch contains talcum, carrier resin and some additives. It’s suitable for film blowing, extrusion molding, injection molding, etc. This product has dispersion very fine, free of agglomeration and bring for the end product more improve printability, smoothness, hardness, stiffness, antiblock, etc. It is mainly used for PP, PE plastic sheet and plastic injection and EPE foaming.
Product Data:

Name	Talc filler masterbatch for injection molding and EPE foaming
Filler	Talcum
Mesh	1250~1500
Filler content	≤75%
Carrier	PP/PE
MFI ( g/10min )	2~15
Density ( g/cm3)	1.6~1.7
Moisture	≤0.01%
Adding ration	5~50%
Application	Injection molding, EPE foaming, etc.
Payment terms	TT , LC etc.
Delivery time	Less than 7 days
Packing	25Kg per bag. compound woven bags with plastic inner bag, or customized
MOQ	1 ton
Storage	Keep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.

Product Advantages:
1.The oil absorption of the powder is low, good fluidity and dispersion, good surface finishes of the products.
2.Light Specific gravity, high transparent and brightness, the refractive index close to the PP、PE
3.The high adding ratio is more than 50%.
4.Good dispersion, do not separate out.
5.Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property, improve the strength and toughness of the product.
6.Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding
Application:

Model No.	Application
H-1	Used for blow film/extrusion, such as shopping bags, hollow sheet.
H-8	Used for blow film/blow molding/extrusion, such as
H-10	EPE foaming and also customized