Technical features

Using the gear-motor drives produced by leading European manufacturers, that let to increase the specified run to 28000-30000 hours and to increase the energetic potential of the conveyor on 7-9% according to raise on 100% efficiency of gear-motor drive.
Compact dimension size of drive head of the conveyor due to binding of gear-motor drive on torque rod.
Using the fettle of high-wear part s of discharge box with constructive sheet steel Steel Pro or polyurethane Elasturan 6025.
Using of effective cleaning system, that precludes the spillage of dust, that sticks to the drag mechanism.
Increasing of working time of axles, cylinder hubs on 30-40%due to using of alloy steel with thermal treatment(volumetric hardening or carbonization).
Durability of the mechanism is provided due to the manufacturing of tension screw from Steel 45 GOST1050-8 and nut from the material БрОЗЦ7С5Н1 GOST 613-79.
Using of partial execution mode of transportation with low speeds(not more than 2.5m/s) and special calculated discharging system let to decrease the breakage of product on 1.5-2%.
Unification and changeability of the construction elements gives a possibility to minimize the work labor input during the performance restoration of the conveyor.
Increasing of belt durability due to the fluent swerving into channeled condition and return, and also exception of its fractures.
The possibility of construction the conveyor with dedusting cover or with cover from athmospherical condensation.
Using of build-in control devices of conveyor work(sensors of: backup, belt blastoff, belt speed, emergency stop with wire), block of belt reverse by slope angle more than 9 degrees, observance of work safety standards, safety instructions and also the ful integration into automated control of any grade grain mills.